Exposure to gallium arsenide nanoparticles in a research facility: a case study using molecular beam epitaxy.

We evaluated GaAs nanoparticle-concentrations in the air and on skin and surfaces in a research facility that produces thin films, and to monitored As in the urine of exposed worker. The survey was over a working week using a multi-level approach. Airborne personal monitoring was implemented using a miniature diffusion size classifier (DiSCMini) and IOM sampler. Environmental monitoring was conducted using the SKC Sioutas Cascade Impactor to evaluate dimensions and nature of particles collected. Surfaces contamination were assessed analyzing As and Ga in ghost wipes. Skin contamination was monitored using tape strips. As and Ga were analyzed in urines collected every day at the beginning and end of the shift. The greatest airborne exposure occurred during the cutting operations of the GaAs Sample (88883 np/cm3). The highest levels of contamination were found inside the hood (As max = 1418 ng/cm2) and on the laboratory floor (As max = 251 ng/cm2). The average concentration on the worker's skin at the end of the work shift (3.36 ng/cm2) was more than 14 times higher than before the start of the shift. In weekly urinary biomonitoring an average As concentration of 19.5 µg/L, which was above the Società Italiana Valori di Riferimento (SIVR) reference limit for the non-occupational population (2.0 - 15 µg/L), but below the ACGIH limit (30 µg/L). Overall, airborne monitoring, surface sampling, skin sampling, and biomonitoring of worker confirmed the exposure to As of workers. Systematic cleaning operations, hood implementation and correct PPE management are needed to improve worker protection.

3D human foreskin model for testing topical formulations of sildenafil citrate.

Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.

Probing the effectiveness of barrier creams against human skin penetration of nickel powder.

OBJECTIVE: Barrier creams (BCs) are marketed as locally applied medical devices or cosmetic products to protect the skin from exposure to chemicals and irritants. Generally, the mechanism of action of such products is mainly due to the formation of a superficial thin film between the skin and the irritant or sensitizer, thus reducing or totally blocking the cutaneous penetration of such agents. Specifically, studies focusing on the effectiveness of commercial protective creams to prevent nickel cutaneous penetration are extremely scarce. The aim of the current work, therefore, is to evaluate the protective role of a commercially available barrier cream for nickel and compare the results with a simple moisturizing, following exposure to Ni powder. METHODS: Marketed BCs were evaluated and tested. Human skin absorption of Ni was studied in vitro using static Franz diffusion cells. RESULTS: Our results demonstrate that the application of both formulations caused a reduction of Ni inside the skin (8.00 ± 3.35 µg cm-2 for the barrier cream and 22.6 ± 12.6 µg cm-2 for the general moisturizing product), with the specialized barrier cream being statistically (p = 0.015) more efficient on forming a protective barrier, thus evidencing the importance of some ingredients in such formulations on the nickel dermal accumulation. CONCLUSIONS: The composition of the formulations based on film-forming or chelating agents may play an imperative role in reducing the cutaneous penetration of Ni.

OBJECTIF: Les crèmes de barrière (CB) sont commercialisées en tant que dispositifs médicaux ou produits cosmétiques appliqués localement pour protéger la peau contre l'exposition aux produits chimiques et irritants. En général, le mécanisme d'action de ces produits est principalement dû à la formation d'un film mince superficiel entre la peau et l'irritant ou le sensibilisant, réduisant ainsi ou bloquant totalement la pénétration cutanée de ces agents. Plus précisément, les études portant sur l'efficacité des crèmes protectrices commercialisées pour prévenir la pénétration cutanée du nickel sont extrêmement rares. L'objectif du projet en cours est donc d'évaluer le rôle protecteur d'une crème barrière disponible dans le commerce contre le nickel et de comparer les résultats à un simple hydratant après une exposition à la poudre de Ni. MÉTHODES: Des CB commercialisées ont été évaluées et testées. L'absorption cutanée du Ni dans la peau humaine a été étudiée in vitro à l'aide de cellules de diffusion statiques de Franz. RÉSULTATS: Nos résultats démontrent que l'application des deux formulations a entraîné une réduction du taux de Ni à l'intérieur de la peau (8,00 ± 3,35 µg·cm-2 pour la crème barrière et 22,6 ± 12,6 µg·cm-2 pour le produit hydratant ordinaire), la crème barrière spécialisée étant statistiquement (p = 0,015) plus efficace pour former une barrière protectrice, démontrant ainsi l'importance de certains ingrédients dans ces formulations sur l'accumulation dermique du nickel. CONCLUSIONS: La composition des formulations basées sur des agents de formation de film ou de chélation peut jouer un rôle nécessaire pour réduire la pénétration cutanée du Ni.

Interpreting permeability as a function of free drug fraction: The case studies of cyclodextrins and liposomes.

In order to solubilize poorly soluble active pharmaceutical ingredients, various strategies have been implemented over the years, including the use of nanocarriers, such as cyclodextrins and liposomes. However, improving a drug's apparent solubility does not always translate to enhanced bioavailability. This work aimed to investigate to which extent complexation with cyclodextrins and incorporation into liposomes influence drug in vitro permeability and to find a mechanistic description of the permeation process. For this purpose, we investigated hydroxypropyl-ß-cyclodextrin (HP-ß-CD) and phosphatidylcholine liposomes formulations of three chemically diverse compounds (atenolol, ketoprofen and hydrocortisone). We studied drug diffusion of the formulations by UV-localized spectroscopy and advanced data fitting to extract parameters such as diffusivity and bound-/free drug fractions. We then correlated this information with in vitro drug permeability obtained with the novel PermeaPadⓇ barrier. The results showed that increased concentration of HP-ß-CD leads to increased solubilization of the poorly soluble unionized ketoprofen, as well as hydrocortisone. However, this net increment of apparent solubility was not proportional to the increased flux measured. On the other hand, normalising the flux over the empirical free drug concentration, i.e., the free fraction, gave a meaningful absolute permeability coefficient. The results achieved for the liposomal formulation were consistent with the finding on cyclodextrins. In conclusion, we proved the adequacy and usefulness of our method for calculating free drug fractions in the examined enabling formulations, supporting the validity of the established drug diffusion/permeation theory that the unbounded drug fraction is the main driver for drug permeation across a membrane.

Incidence and Determinants of Symptomatic and Asymptomatic SARS-CoV-2 Breakthrough Infections After Booster Dose in a Large European Multicentric Cohort of Health Workers-ORCHESTRA Project.

BACKGROUND: SARS-CoV-2 breakthrough infections (BI) after vaccine booster dose are a relevant public health issue. METHODS: Multicentric longitudinal cohort study within the ORCHESTRA project, involving 63,516 health workers (HW) from 14 European settings. The study investigated the cumulative incidence of SARS-CoV-2 BI after booster dose and its correlation with age, sex, job title, previous infection, and time since third dose. RESULTS: 13,093 (20.6%) BI were observed. The cumulative incidence of BI was higher in women and in HW aged < 50 years, but nearly halved after 60 years. Nurses experienced the highest BI incidence, and administrative staff experienced the lowest. The BI incidence was higher in immunosuppressed HW (28.6%) vs others (24.9%). When controlling for gender, age, job title and infection before booster, heterologous vaccination reduced BI incidence with respect to the BNT162b2 mRNA vaccine [Odds Ratio (OR) 0.69, 95% CI 0.63-0.76]. Previous infection protected against asymptomatic infection [Relative Risk Ratio (RRR) of recent infection vs no infection 0.53, 95% CI 0.23-1.20] and even more against symptomatic infections [RRR 0.11, 95% CI 0.05-0.25]. Symptomatic infections increased from 70.5% in HW receiving the booster dose since < 64 days to 86.2% when time elapsed was > 130 days. CONCLUSIONS: The risk of BI after booster is significantly reduced by previous infection, heterologous vaccination, and older ages. Immunosuppression is relevant for increased BI incidence. Time elapsed from booster affects BI severity, confirming the public health usefulness of booster. Further research should focus on BI trend after 4th dose and its relationship with time variables across the epidemics.

Evaluating the role of protective creams on the cutaneous penetration of Ni nanoparticles.

There is an increase of application of Nickel in the form of nanoparticles (NiNPs) in several fields including modern metallurgy, bioengineering, and medicine. Such growth of the areas of application is actually accompanied with an increase of exposure to Nickel, thus an intensification of the negative effects, the most frequent being the allergic contact dermatitis. Indeed, due to their smaller size, and therefore their higher surface area, NiNPs can release more Ni ions compared to bulk material, that can penetrate and permeate through the skin. To reduce the Ni cutaneous penetration, barrier creams (BC) are applied on the skin surface. There is little information, however, on the efficiency of such commercial protective creams on decreasing Ni cutaneous penetration. For this reason, the objective of the current study was to investigate the protective role of one commercially available formulation for Ni (Nik-L-Block™ containing a chelating agent) and one moisturizing cream (Ceramol 311 basic cream without chelating agent), following exposure to NiNPs, using in vitro Franz cells, as well as the cytotoxicity of NiNPs in primary human dermal fibroblasts was studied. Our results demonstrated that although both tested formulations can decrease Ni accumulation in the skin (4.13 ± 1.74 µg/cm2 for Nik-L-Block™ and 7.14 ± 1.46 µg/cm2 for Ceramol 311 basic cream); there are significant differences between the two creams (p = 0.004). Based on the experimental evidence, we therefore conclude that the composition of such formulations has an imperative role for dermal uptake of Ni. Finally, NiNPs showed no cytotoxic effect on cultured human dermal fibroblasts after 24 and 72 h.

Validation and testing of a new artificial biomimetic barrier for estimation of transdermal drug absorption.

Human skin remains the most reliable model for studying the transdermal permeation of active compounds. Due to the limited source, porcine skin has been used extensively for performing penetration tests. Performing penetration studies by using human and animal skin, however, would also involve a series of ethical issues and restrictions. For these reasons, new biomimetic artificial barriers are being developed as possible alternatives for transdermal testing. If appropriately optimized, such products can be cost-effective, easily standardized across laboratories, precisely controlled in specific experimental conditions, or even present additional properties compared to the human and animal skin models such as negligible variability between replicates. In this current work we use the skin mimicking barrier (SMB) for drug permeability tests. The aim was to evaluate the suitability of the new barrier for studying the percutaneous absorption of the lipophilic extract of the plant Zingiber officinale Roscoe in vitro and compare its permeability ability with the artificial membrane Permeapad® and porcine skin. Our results showed that the permeability values obtained through the SMB are comparable are comparable to those obtained by using the porcine skin, suggesting that the new barrier may be an acceptable in vitro model for conducting percutaneous penetration experiments.

Cyclodipeptides: From Their Green Synthesis to Anti-Age Activity.

Cyclodipeptides (CDPs) or diketopiperazines (DKPs) are often found in nature and in foodstuff and beverages and have attracted great interest for their bioactivities, biocompatibility, and biodegradability. In the laboratory, they can be prepared by green procedures, such as microwave-assisted cyclization of linear dipeptides in water, as performed in this study. In particular, five CDPs were prepared and characterized by a variety of methods, including NMR and ESI-MS spectroscopies and single-crystal X-ray diffraction (XRD), and their cytocompatibility and anti-aging activity was tested in vitro, as well as their ability to penetrate the different layers of the skin. Although their mechanism of action remains to be elucidated, this proof-of-concept study lays the basis for their future use in anti-age cosmetic applications.

Transdermal permeation of inorganic cerium salts in intact human skin.

The stratum corneum protects the body against external agents, such as metals, chemicals, and toxics. Although it is considered poorly permeable to them, comprising the major barrier to the permeation of such substances, it may become a relevant gate of entry for such molecules. Cerium (Ce) is a lanthanide that is widely used in catalytic, energy, biological and medicinal applications, owing to its intrinsic structural and unique redox properties. Cerium salts used to produce cerium oxide (CeO2) nanostructures can potentially come into contact with the skin and be absorbed following dermal exposure. The objective of this study was to investigate the percutaneous absorption of three inorganic Ce salts: cerium (III) chloride (CeCl3); cerium (III) nitrate (Ce(NO3)3) and ammonium cerium (IV) nitrate (Ce(NH4)2(NO3)6), which are commonly adopted for the synthesis of CeO2 using in vitro - ex vivo technique in Franz diffusion cells. The present work shows that Ce salts cannot permeate intact human skin, but they can penetrate significantly in the epidermis (up to 0.29 µg/cm2) and, to a lesser extent in dermis (up to 0.11 µg/cm2). Further studies are required to evaluate the potential effects of long-term exposure to Ce.

Assessment of dermal absorption of beryllium and copper contained in temple tips of eyeglasses.

Dermal exposure to hazardous substances such as chemicals, toxics, metallic items and other contaminants may present substantial danger for health. Beryllium (Be) is a hazardous metal, especially when inhaled and/or in direct contact with the skin, associated with chronic beryllium disease (CBD) and Be sensitization (BeS). The objective of this study was to investigate the percutaneous penetration of beryllium and copper contained in metallic items as eyeglass temple tips (specifically BrushCAST® Copper Beryllium Casting Alloys containing Be 0.35 < 2.85%; Cu 95.3-98.7%), using Franz diffusion cells. This work demonstrated that the total skin absorption of Cu was higher (8.86%) compared to Be (4.89%), which was expected based on the high percentage of Cu contained in the eyeglass temple tips. However, Be accumulated significantly in the epidermis and dermis (up to 0.461 µg/cm2) and, to a lesser extent, in the stratum corneum (up to 0.130 µg/cm2) with a flux of permeation of 3.52 ± 4.5 µg/cm2/hour and lag time of 2.3 ± 1.3 h, after cutaneous exposure of temple tip into 1.0 mL artificial sweat for 24 h. Our study highlights the importance of avoiding the use of Be alloys in items following long-term skin contact.

Percutaneous metals absorption following exposure to road dust powder.

The skin constitutes a protective barrier to external physical and chemical aggressions. Although it is constantly exposed to various xenobiotics, it is generally considered poorly permeable to them, as for example metal ions, becoming unfortunately an entry route of such substances. Metals may penetrate inside the skin inducing more or less local effects such as skin sensitization and potential metals diffusion into the bloodstream. The objective of the study was to investigate the percutaneous penetration of metals in vitro - ex vivo in Franz cell with intact as well damaged skin applying a road dust powder. Moreover, porcine and human skins were compared. This study demonstrated that, after the application of a road dust powder on the skin, metals can penetrate and permeate this cutaneous membrane. From this experimental analysis, in intact skin lead (Pb) achieved the highest skin absorption in both human and porcine skin, while skin absorption profile of cobalt (Co) was the lowest in human skin than the one in porcine model. The concentrations of Ni present in receiving solution were higher compared to other metals in all experiments performed. The present work, definitely shows that metals permeation through damaged skin is accelerated than intact skin, as a result of the weaker cutaneous barrier function. According to published data, pig skin appeared as a suitable model for human skin. Our results confirmed that skin absorption of metals can be relevant in environmental exposures.

Skin decontamination procedures against potential hazards substances exposure.

Decontamination of unprotected skin areas is crucial to prevent excessive penetration of chemical contaminants after criminal or accidental release. A review of literature studies was performed to identify the available decontamination methods adopted to treat skin contamination after chemical, radiological and metal exposures. In this bibliographic review, an overview of the old and recent works on decontamination procedures followed in case of potential hazards substances contaminations with a comparison between these systems are provided. Almost all data from our 95 selected studies conducted in vitro and in vivo revealed that a rapid skin decontamination process is the most efficient way to reduce the risk of intoxication. The commonly-used or recommended conventional procedures are simple rinsing with water only or soapy water. However, this approach has some limitations because an easy removal by flushing may not be sufficient to decontaminate all chemical deposited on the skin, and skin absorption can be enhanced by the wash-in effect. Other liquid solutions or systems as adsorbent powders, mobilizing agents, chelation therapy are also applied as decontaminants, but till nowadays does not exist a decontamination method which can be adopted in all situations. Therefore, there is an urgent need to develop more efficient and successful decontaminating formulations.

Shape-selective synthesis of nanoceria for degradation of paraoxon as a chemical warfare simulant.

Repeated attacks using organophosphorus compounds, in military conflicts or terrorist acts, necessitate developing inexpensive and readily available decontamination systems. Nanosized cerium oxide is a suitable candidate, acting as a heterogeneous catalyst for the degradation of organophosphorus compounds such as VX agent or sarin. However, the reaction mechanism of the phosphatase mimetic activity of CeO2 nanoparticles is not fully described. Adsorption, surface-promoted hydrolysis, and desorption cycles strongly depend on the physico-chemical characteristics of the facets. In this study, CeO2 nanoparticles with different shapes were elaborated by hydrothermal synthesis. Nano-octahedra, nanocubes, or nanorods were selectively obtained under different conditions (temperature, concentration and nature of the precursors). The degradation activity according to the crystal faces was evaluated in vitro by measuring the degradation kinetics of paraoxon organophosphate in the presence of CeO2 nanoparticles. The results show an influence of both specific surface area and crystal faces of the nanoparticles, with higher activity for {111} facets compared to {100} facets at 32 °C. The relative activity between the facets is ascribed to the adsorption probability, assuming coordination between the phosphoryl oxygen and cerium atoms, but also to the surface density of the Ce doublets with relevant spacing for phosphatase mimetic activity.